INDUS SUPER BRUTEIndus Super Brute Conveyor Belts are manufactured to suit a wide range of applications. Limestone, coal, cement, aggregate, sand, sludge, furnace slag, waste & scrap are some of the products which can be conveyed on the Indus Super Brute Conveyor Belts. The Indus Super Brute Conveyor Belt is used in metal, mines & minerals industries, cement plants, thermal power plants, aggregate and quarry industries.
| Standard Widths | Up To 2200mm (86") | Up To 5000mm (197") Available with longitudinal joint |
| Type Of Fabric | EP / NN / PP / EE |
| Breaker Fabric Ply | Optional / As per customer requirement |
| Standard Belt Rating | 200 N/mm (110 PIW) To 3200 N/mm (1800 PIW) |
| No. of Ply’s | 1 Ply To 8 Ply |
| Rubber Cover Thickness | 1mm (1/25") To 25mm (1") |
| Colour | Black |
| Edge | Cut Edge / Moulded Edge |
| Splicing Method | Hot / Cold / Mechanical |
| Single Roll Length | Standard Length : 300 meters (1000') | Up to 1000 meters (3300') depending upon total belt thickness |
| Standard Packing | Wrapping in HDPE sheets with Strapping. | (Wooden Crate / Metal Crate packing is available on request) |
| Belt Identification Number | A unique BIN (Belt Identication Number) At Every 10 Meters(33') |
| Cover Grades | Applicable Standards | Min. Tensile Strength (MPa) |
Min. Elongation at Break (%) |
Max. Abrasion Loss (mm³) |
Application Areas |
|---|---|---|---|---|---|
| DIN-Z | DIN 22102 | 15 | 350 | 250 | Suitable to convey less abrasive material such as soda,earth,smooth sand, ground cement,clay,slaked lime, charcoal, grain flour, dry inert powder, wood chips & dry pulps under standard working conditions. |
| RMA-2 | RMA | 14 | 400 | 200 | |
| ISO-L | ISO 10247 | 15 | 350 | 200 | |
| IS-N-17 | IS 1891 | 17 | 400 | 200 | |
| AS-N | AS 1332 | 17 | 400 | 200 | |
| ARPM RMA-2 | ARPM | 14 | 400 | 175 | |
| SANS-N | SANS 1173 | 17 | 400 | 150 | Suitable to convey moderately sharp & abrasive material such as rubble, sharp sand ,lump & powder of superphosphate, bone, coal, ashes,unslaked lime , un-grounded cement under average working conditions. |
| RMA-1 | RMA | 17 | 400 | 150 | |
| DIN Y | DIN 22102 | 20 | 400 | 150 | |
| SANS-C | SANS 1173 | 20 | 400 | 150 | |
| IS-M-24 | IS 1891 | 24 | 450 | 150 | |
| ARPM RMA-1 | ARPM | 17 | 400 | 125 | |
| AS-M | AS 1332 | 24 | 450 | 125 | |
| ISO-H | ISO 10247 | 24 | 450 | 120 | |
| SANS-M | SANS 1173 | 25 | 450 | 120 | |
| DIN X | DIN 22102 | 25 | 450 | 120 | |
| ISO-D | ISO 10247 | 18 | 400 | 100 | Suitable to convey highly abrasive materials such as lumps of highly abrasive metal ores. |
| DIN-W /HAR | DIN 22102 | 18 | 400 | 90 | |
| SANS-A | SANS 1173 | 18 | 400 | 70 | Suitable to convey highly abrasive material such as combination of highly abrasive lumps & fines. |
| AS-A / SAR | AS 1332 | 17 | 400 | 70 | |
| Crusher+ | Indus | 20 | 450 | 70 | Specially formulated cover to provide the best combination of tensile strength and abrasion resistance. It is specifically designed for primary crusher units to handle high impact and high abrasive material enabling maximum possible output. |
| Crusher++ | Indus | 20 | 400 | 50 | |
| UAR | Indus | 18 | 400 | 40 | Specially formulated cover for carrying extremely high abrasive material in form of granules & fines. |
| Rip & Tear Resistant (RTR-A) |
Indus | 26 | 450 | 100 | Suitable to convey a combination of high impact, high cut, high gouge & high rip material such as extremely sharp lumps & high impact materials. |
| Rip & Tear Resistant (RTR-B) |
Indus | 28 | 500 | 150 |
*Specifications are subject to change without notice.
BACK
DOWNLOAD PDF